To pair your Eastlink remote, you first need to program the remotes to the decoder. You can do this by using the programming guide that comes with your Eastlink remote. Once you have programmed the remotes, you then need to use them to connect to your TV set. To do this, you will need to use one of the two methods that Eastlink provides for connecting your TV set. The first method is called “Remote Connect.” This method requires you to plug in your TV set and then use one of the remotes that come with your Eastlink remote. The second method is called “Remote Control.” This method requires you to connect your TV set and then use one of the remotes that come with your Eastlink remote.

To program the remote to your TV, follow these steps;

To pair your TV with your Eastlink box, first turn on the TV and the decoder or receiver box. Once both are on, press the TV or device button. The light will blink twice and you’ll need to press the setup button on the remote again. After that, long press the OK button for a few seconds. Release it after a few seconds and the light will turn off. Your TV and remote are now paired! ..

  1. Open the app on your phone and press the “pair” button.
  2. Enter the TV’s model number in the app and press “pair.”
  3. The TV should now be paired and you can start using your remote. ..

If using the Remote guide, on switching on the TV set and the remote, you will be taken on a tour around the controls being displayed on the screen which is the easier way. All you need is just to accept the permission. If the remote guide method does not connect to the TV set successfully, you can set it up using the auto-search method. To use this method, switch on the television to be programmed and ensure a stable power supply to it.Also switch on the Eastlink remote and look through for the menu and OK button as these will be the major buttons to be used for this method of connection.Long press both buttons for a few seconds until the input button blinks twice and then press TV power and at this point, the input light will remain on.Point your remote towards your TV set and long-press UP button.After a few seconds, release UP button and TV will go off which means TV code has been saved on remote’s memory. ..

  1. Check the TV set’s power cord for a proper connection.
  2. Check the TV’s power cord for any obstructions or damage.
  3. Check the TV’s screen and make sure it is clear and free of any obstructions or damage.
  4. Check the TV’s input and make sure it is properly connected to the TV set.

Remove the old battery from the remote and fix a new battery. This step is to ensure that the remotes get an adequate measurement of power supply.Ensure the receiver device of the Eastlink remote is turned on and in good working condition.Proceed to change the channel with the use of the remote and take note if the remote functioned properly at this stage.If not, check for any obstruction between the receiver and the decoder and remove them as required.Change the position of the receiver to a position where it will be easy for the remote to communicate with the receiver.If all these efforts did not work out, unplug and replugthe receiver ensuring that you delaythe replugging for at least 60 seconds after unplugging. This will helpthe receiver to reset.If all efforts proved abortive, kindly take your receiver tothe technician’s office and let them run a diagnostic and repair on it.

Eastlink has been providing cable TV services to the United States for over 25 years. They have come up with innovative and adaptive ways to make their services more user-friendly and adaptive. This has made them one of the most popular cable TV companies in the United States today.