How to fix it if Wi-Fi or Bluetooth can’t turn on iPhones?
The iPhone 4S appears to be the device most seriously damaged, according to several users. If you’re one of them, here’s how to solve it.
The Official Fix from Apple for iPhone 4S
When the issue initially started to affect many iPhone 4S users, Apple offered a potential solution. The suggested fixes, indicating that there is a software problem, include resetting networking settings and, if all else fails, carrying out a full software reset in iTunes. The instructions are listed below. Although the iPhone 4S was the target device for these instructions, they must still apply to later models (and software), and the method for carrying them out should be the same. Follow these steps:
- By selecting Settings > Aeroplane Mode, make sure that aeroplane mode is not active.
- By selecting Settings > General > Reset > Reset Network Settings, you may reset the network settings.
- Keep in mind: Resets all network settings, including VPN, APN, Bluetooth pairing history, Wi-Fi passwords, and Wi-Fi security questions.
- Verify that the software on your device is the most recent. Connect your device to your computer and use iTunes to check for updates.
- Perform a software restore in iTunes if your problem is still not fixed.
Apple encouraged consumers to contact Apple for support and service alternatives if they were still unable to activate Wi-Fi. That advice should still be valid, but anyone whose devices are still covered by warranties should be able to get them replaced or serviced without paying anything. However, if your gadget is not covered by Apple’s guarantee, you could have to pay to have it mended or purchase a replacement.
Additional Options for the iPhone 4S
Some customers said that Apple’s fix had resolved their problems, but others argued it hadn’t. Those who were still having problems believed that the iPhone 4S’s hardware defect had been found by the iOS 7 upgrade. According to a user on Apple’s support forums, the issue was there in the device from the beginning since it was defective, but it wasn’t noticed until the HEAT that was produced during the upgrade process caused the wi-fi chip to malfunction. The website suggests trying to put the phone in a refrigerator for 15 minutes or exposing it to light for 30 minutes if this is your problem. However, you do this at your own risk, and we advise consumers to contact Apple support before acting.
Gray Wi-Fi on Other iPhones
Since this issue first appeared, customers have stated that they have experienced problems with their iPhone 5, iPhone 6, iPhone 7, iPhone 8, and iPhone X models. Two possible reasons have been cited for the problem: software upgrades and specific iOS versions. Customers who have had problems with their devices say that they have had to update their devices to newer versions of the iOS software in order to fix the issues.
Why is iPhone 12’s Wi-Fi and Bluetooth Grayed Out?
The iPhone’s Wi-Fi is resetting the networking settings will restore Wi-Fi. To proceed, enter the connection passcode in the Reset Network Settings box.
Why Won’t iPhone Turn on the Wi-Fi?
If your phone has a missing or broken component, you might be able to use Wi-Fi again. If a flex cable or Wi-Fi antenna has come undone, it’s possible that a wireless network is not available. ..
Why Does Bluetooth Not Turn on iPhone?
Your Bluetooth equipment should be connected for iOS and iPadOS devices. Your Bluetooth equipment should be turned off and afterwards turned back on. Your device has to be fully charged or linked to a power source, depending on your Bluetooth accessories. Ensure that your accessory has batteries because they might need to be changed otherwise.
What to do If Bluetooth and Wi-Fi Won’t Work?
If your device has been disconnected from the internet, reconnecting it may fix momentary OS problems. The device’s reboot may lower its battery life. Simply take out the battery, let it sit for 30 seconds, and then replace it. GPS and location access should be turned on. If you have installed any third-party apps using Wi-Fi or Bluetooth, remove them. ..
Apple’s phones have frequently had problems since the iPhone 4S’s introduction. Due to the problem, which mostly impacted the iPhone 4S, the Wi-Fi choice seemed “greyed out” or “dim.” Even though not all of its proposed remedies were successful, Apple responded quickly to this problem. People created their own therapies in the meantime, with varied degrees of effectiveness. When the issue initially started to affect many iPhone 4S customers, Apple offered a potential solution. The suggested fixes, which imply that there is a software problem, include resetting networking settings and, if all else fails, carrying out a full software reset through iTunes.
The iPhone’s Wi-Fi and Bluetooth don’t work because they are not connected properly.
If your iPhone is not working properly, it may be because of a problem with the battery. After a minute, turn it off and then back on. If the problem persists, you may need to replace the battery.
The iPhone’s Bluetooth is not working properly.
In Settings, you can turn off the Bluetooth ON button to reactivate Bluetooth without having to restart the app.
